Serrat Mulchers: Biomass range

Serrat Biomass Mulchers

Serrat believe in the use of the remains of wood biomass for conversion into heat energy and its recognition as a source of clean, renewable energy, convinced that the future will reach the prominence it deserves.

Get in touch

Want to find out more?
or

Biomass FX

Heavy-duty Biomass recovery mulcher for prunings for tractors of 300 HP and more. 
Mulcher with main feeder with BRALACK system, pre-grading and volumetric RHENDUEL 30, second grading and granulometry with rotor RHENDUEL 10, reaction-and-impulse turbine with independent transmission between the machine and the deposit.

  • 3 point hitch category III – IV
  • Steel-plate chassis
  • Double hydraulic feeder, system Bralakc
  • Pre-grading rotor and volumetric Rhenduel 30
  • Second refining rotor Rhenduel 10
  • Triple feed chain
  • 5 SPCX side belt transmission
  • Independent transmission for each rotors
  • PTO 1000 rpm
  • Model built under EC Normative
  • Safety indicators visible to personnel

Biomass 200

The SERRAT Biomass recovery mulcher consists in a pick-up rotor which lifts up the pruning of fruit trees, vineyard and branches in a second rotor to mulch it. It can be operated by tractors from 150 to 170 HP and 180 to 200 HP with power take off on the front lift. 
In the case of a standard tractor with a front power takeoff, it’s possible to hitch a trailer behind to store the mulched material.
Mulcher with double reversible hydraulic feeder (system BRALAKC). 
This mulcher is capable of mulching branches up to 10 – 12 cm of diameter. The size grading is adapted so that the material can be directly used in waste heat boiler of biomass.

  • 3 point hitch category II – III
  • Steel-plate chassis
  • Double hydraulic feeder, system BRALAKC
  • Rotor with system RHENDUEL
  • Triple feed chain
  • 4 + 3 XPC side belt transmission
  • Cardan transmission with mechanical protection
  • Reaction-and-impulse turbine with independant transmission
  • PTO 1000 rpm
  • Model built under EC Normative
  • Safety indicators visible to personnel

Biomass 150

The SERRAT Biomass recovery mulcher consists in a pick-up rotor which lifts up the pruning of fruit trees, vineyard and branches in a second rotor to mulch it. It can be operated by tractors from 100 to 150 HP and 150 to 170 HP with power take off on the front lift.
In the case of a standard tractor with a front power takeoff, it’s possible to hitch a trailer behind to store the mulched material.
Mulcher with double reversible hydraulic feeder (system BRALAKC). 
This mulcher is capable of mulching branches up to 8 – 10 cm of diameter. The size grading is adapted so that the material can be directly used in waste heat boiler of biomass.

  • 3 point hitch category II – III
  • Steel-plate chassis
  • Double hydraulic feeder, system BRALAKC
  • Rotor with system RHENDUEL
  • Triple feed chain
  • 3+4 XPC / XPB side belt transmission
  • Cardan transmission with mechanical protection
  • Reaction-and-impulse turbine with independant transmission
  • PTO 1000 rpm
  • Model built under EC Normative
  • Safety indicators visible to personnel

Biomass 100

The SERRAT Biomass recovery mulcher consists in a pick-up rotor which lifts up the pruning of fruit trees, vineyard and branches in a second rotor to mulch it. It can be operated by tractors from 70 to 120 HP and 130 to 140 HP with power take off on the front lift.
In the case of a standard tractor with a front power takeoff, it’s possible to hitch a trailer behind to store the mulched material. 
Mulcher with double reversible hydraulic feeder (system BRALAKC).
This mulcher is capable of mulching branches up to 6 cm of diameter. The size grading is adapted so that the material can be directly used in waste heat boiler of biomass.

  • 3 point hitch category III
  • Steel-plate chassis
  • Double hydraulic feeder, system BRALAKC
  • Rotor with system RHENDUEL
  • Triple feed chain
  • 3+4 XPC / XPB side belt transmission
  • Cardan transmission with mechanical protection
  • Reaction-and-impulse turbine with independant transmission
  • PTO 1.000 rpm
  • Model built under EC Normative
  • Safety indicators visible to personnel

Biogreen

Biogreen mulcher, in just one operation and with the usual speed is able to cut and launch the grass and branches to a deposit to remove them from the ground. With this special application SERRAT wants to contribute to the maintenace of natural areas, roadsides and abores all. 
wetlands exporting the remains directly to a deposit or a trailer.

  • Steel-plate chassis, thickness 8 mm
  • Rotor Polser of 600 mm of diameter
  • Gearbox SERRAT
  • Steel worm screw with 300 mm of diameter
  • Reaction and impulse turbine with independant transmission
  • 5 SPCX side belt transmisssion
  • GIROSTOP system
  • Supports of bearing rotor in steel
  • Oscillating bearings of double row of rollers
  • Front protection curtain
  • Obturations antiwire in rotor
  • Serrat forged hammers for grass
  • PTO 1000 rpm
  • Steel counter knives
  • Model built under EC Normative
  • Safety indicators visible to personnel

Biosylva Side Shift

Biosylva mulcher, in just one operation and with the usual speed is able to cut and launch the grass and branches, up to 10 cm of diameter, to a deposit to remove them from the ground. 
With this special application SERRAT wants to contribute to the maintenance of natural areas, roadsides and above all wetlands exporting the remains directly to a deposit or a trailer and to use them later for the production of compost or for biogas.

  • Steel-plate, thickness 8 mm
  • Rotor Polser + of 600 mm of diameter
  • Gearbox SERRAT for tractors of 180 HP
  • Steel worm screw
  • Turbine with mechanical activation
  • 5 XPC side belt transmission
  • Supports of bearing rotor in steel
  • Oscillating bearings of double row of rollers
  • Obturations antiwire in rotor
  • Forestry hammers SERRAT
  • PTO 1.000 rpm
  • Steel counter knives
  • Model built under EC Normative
  • Safety indicators visible to personnel

Trigon pack

This mulcher is suitable for mulching grass and branches up to 4 cm in diameter. 
Suited for mulching wooden material such as pruning and branches, ideal for vineyards, gardens, swimming pools, outdoor sports facilities, etc.
Great capacity to collect leaves and all kinds of garbage (bottles, papers, plastic bottles, bags, etc.). 
Mulcher is equipped with a rotor with forged hammers guaranteed against breakage, and with an unloading hopper.

  • Steel-plate chassis
  • Hammers guaranteed against breakage
  • Skid shoes adjustable
  • Basket of storage
  • Hopper of unloading
  • GIROSTOP System
  • Hydraulic unload
  • Side belt transmission
  • PTO 540 rpm
  • Model built under EC Normative
  • Safety indicators visible to personnel

Pro pack

This mulcher is for the cut and withdrawal of grass and branches up to 8 cm of diameter. 
Cleanliness of gardens, facilies sports and withdrawal of pruning in vineyard and fruit-bearing trees. Great capacity of absorption for the withdrawal of leaves and all kinds of garbages (tins, papers, bottles of plastic, bags, etc.). 
Collection of aromatic plants.

  • Steel-plate chassis
  • Hammers guaranteed against breakage
  • Hopper capacity: 2.5m3
  • Height-adjustable rear roller
  • Basket of storage
  • Hopper of unloading
  • GIROSTOP System
  • Hydraulic unload
  • Side belt transmission
  • PTO 540 rpm
  • Model built under EC Normative
  • Safety indicators visible to personnel

Vina pack

Versatile mulcher for the collection of pruning and branches up to 5cm of diameter. 
Applicable to the industrial gardening for the collection in urban environment, as well as for the collection of material crushed in agriculture, as well as for the collection and mulching of pruning in agriculture. Applying its variants it is possible to work with all kinds of branches and in different climatic situations, included works with remains of trees of perennial leaves and material with many dampness. 
Weight of the crushed material: 200-300kg/m3

  • Steal-plate chassis whit a high elastic limit
  • Hopper capacity: 4 m3
  • Hydraulic tipping hopper
  • Unloading height: 3,10m
  • Height-adjustable rear wheels
  • Power of tractor between 70 and 120 HP
  • Rotor POLSER of 480 mm of diameter
  • PTO 540 – 1000 rpm
  • Model built under EC Normative
  • Safety indicators visible to personnel

Oli Pack

Versatile mulcher in the withdrawal of prunings and branches in general.
Applicable to the industrial gardening for the withdrawal in urban environments, as well as for the withdrawal of material crushed in agriculture. 
Applying its variants it is possible to work with all kinds of branches and in different climatic situations, included works with remains of trees of perennial leaves and material with many dampness. 
Wight of the crushed material: 250 – 400 kg/m3.

  • Steel-plate chassis with a high elastic limit
  • Hopper capacity 6 m3
  • Hydraulically tipping hopper
  • Unloading height: 2,50 mts
  • Height adjustable rear wheels
  • Minimum power 100 HP
  • Hydraulic motor on pick-up system with high torque
  • Rotor Polser
  • PTO 1000 rpm
  • Model built under EC Normative
  • Safety indicators visible to personnel

Biopack

Equipment designed for the withdrawal of residues of pruning in agriculture for its utilization in later processes as bio fuel and composting. 
It integrates a rotor POLSER of 550 mm of diameter.
Its configuration without tow allows to take advantage of the existing tows in the developments, without need of later adjustements.

  • Steel-plate chassis, thickness 10mm
  • Stamped hammers
  • Hdyraulic pick-up system
  • Adjustable hydraulic nozzle
  • Shuttle with three unloading heights
  • Working speed between 1 – 5 km/h
  • Rotor Polser
  • PTO 540 – 1000 rpm (to define)
  • Model built under EC Normative
  • Safety indicators visible to personnel

Get in touch

Want to find out more, or looking for something else?
Even if it’s not listed on our website, we can usually find and supply what you’re looking for.